Struggling with Zippers & Pipings?
Find out How the pros do it.

If you're looking at this Super Slim Zipper Foot, chances are...

• You've been avoiding zippers - because you don't know how to put them in.
  
• You're ok with normal zippers, but concealed zippers have you baffled.
  
• You're sick & tired of unpicking botched results, and need a solution NOW.
  

You're Not Alone. Lots of People have trouble with sewing zippers.

Because the teeth have a funny rolled ridge, and normal zipper foot just can't get close enough to do a decent job.

How many times can you unpick without pulling your hair out?



What if sewing zippers or pipings on your project perfectly was easier than you think?

Often the hard part is to come up with exactly the right tool, for the right job, at the right price. Of course, there is no doubt that in order to achieve beautiful results, you need to practice.....

But the first step is having the right tools.

The Secret Weapon that takes the stress out of sewing on zippers & pipings is a Universal Adjustable Zipper / Piping Foot.

This foot simply screws on - in the same way you would with a walking foot!



This Generic Zipper Foot is the perfect partner for your Domestic Low Shank Sewing Machine, such as a Janome DC2150 and JR1012 (which we also sell. See our other listings).

Designed to fit most Janome (7mm & 5mm), it is also good for Elna, Brother, Singer, plus other brands with Low Shank - simply screw it on!Fits  7mm Low Shank Janome:

2160DC, 3160QDC, 4120QDC, 6260QC, CS995, 19110, DC2101, DC2050, DC2150, DC2200, DC3018, DC3050, DC3100, DC4030, DC6030, DC6050, DC6100, DM7200, DC7100, DC7060, MS5027LE, MW3018LE (MyExcel 18W), 4618, 4618QC, 5018, 5024, 5027, 5124, 6019QC, 6125QC, 6260QC, 652, 653, 654, 655, 655R (150), 659, MC3000, MC3500, MC4000, MC4800, MC4800QC, MC4900QC, MC5200, MC5500, MC5900QC, MC6000, MC6500P, ME4014, ME4015, ME4018, ME4123, Memory 7 (5001), MS2028, MS2522, MX3123, SD2014, SR2000, SS2015, SW2018, plus More.

And fits  5mm Low Shank Janome:

JR1012, RE1306, Jem Gold, Jem Gold 2, Jem Platinum720 (JP720), Jem Platinum760 (JP760), Sewist 509, Sewist 521, Sewist 625E, 1008, 415, 419S, Juno SS107, MS2008, RE1706, S-307, S-313, S-323S, plus More.

Also fits  Elna: Elina 40, 3230, 320, ELJ3210 (Easy Jeans), Lotus (Computerised), 520, 540, 660, 720, 740, 8600, 9600, plus More.




Is this a Genuine Janome Foot?

Unlike some others in the market, this foot is made by the same people that makes branded sewing machine parts. At the same factory where sewing machine companies gets their parts made and packaged - located only a few minutes down the road from one of the BEST sewing machine factory in Taiwan.

This company is a third-generation family business that specialises in presser feet and parts. They are one of the few  certified makers for well-known sewing machine brands. That means you can trust the quality too.

I've personally visited the factory to verify for myself. I was genuinely impressed because of their a high quality assurance of Japanese standard - where the best sewing machines are still being made.

The  only difference is in the packaging - we had ours packaged under our own brand.

This means I'm  100% happy and confident that you and your sewing machine are in safe hands - because I recommend this foot to all my students, and use it for my own sewing too!

So do our happy customers - here's  just one of many reviews:



This is the best sewing foot for inserting zippers, press-studs (or "snap") tape, and more.

This Generic Universal Adjustable Zipper / Piping Foot will soon be your indispensable companion:

• The toe of the foot is narrow for more visibility and precision. So that you can get your stitches exactly where you want it!
  
  
• Adjust the needle to either the right or left to sew both sides of your zipper easily.... like a professional, every time.
  
  
• You can also use it to attach piping, decorative cording or other trims... making your own handbags and soft furnishing - quickly & easily!
  
  
• Designed to fit Low Shank domestic machines with 7mm or 5mm.
  
  

NOTE: You may have seen other type of zipper foot that's more squarish in shape, and the whole thing is a fair bit wider? There might have been one that comes with your sewing machine?


Well, Here's what a budding seamstress finds when she tried on the "square" type:
 



What does "Low Shank" and "High Shank" mean?

It means "shank height" or "shank size".

Most domestic machines have LOW shanks.





Just to give you an idea, we sell about 10 low shank presser feet to ONE high shank foot. That means if you don't know what sort of shank your machine has, it probably has a low shank.

Because High Shank machines are generally "fancy" embroidery models which are more costly, and those who invest in these models tend to know exactly what shank type it is.


What makes this foot "universal"? How does it adjust?

Take a closer look, you will see one adjustable screw or "dial".

As you loosen the screw or "dial" in or out, you will be able to slide the whole foot left or right.

This is where you get to adjust your foot in relation to your needle position to suit ANY situation... and this means you're covered for most sewing projects imaginable!
Next, align your project with your chosen zipper, piping, or trim in their right spot and start sewing. It's as simple as that!



TIP:

You know how you loosen that screw to slide it from side to side when you did the adjustment?

The biggest mistake you can make is not re-tightening that screw. As you sew the foot can vibrate and it might end up directly under the needle and you will crash the needle right into the foot. Flying broken needle tips are dangerous. Remember to tighten the screw!



This foot goes onto your machine just like any other screw-on presser foot, and it is designed to fit most top-loading domestic machines with Low Shank.

When you try sewing your binding on WITHOUT this foot, you will find:

1. You end up with "gaps" where your stitching isn't close enough to your zipper teeth or piping cord..
2. Your curve lines (say, on the side of a bodice) turn out "bumpy" instead of smooth.
3. Now, you either resolve to pinning the living daylight out of it (and do your best to avoid pin pricks), or simply hand-tacking it all the way. Not fun....
4. Worst of all: you go to unpick the problem area for the Nth time, only to find that you've got a permanent perforation (from all your previous unpick attempts) where your stitches should be. So you'd have to start all over again....!

Why?

Because the weave of your fabric can only withstand a limited amount of manipulation, especially on a curve!



You see, each time you push the fabric through the machine, the needle & thread push aside the fibres, create holes and "lodge" themselves in to your fabric.

Which means each time you remove an unsuccessful attempt, some of the holes are left behind.....

This causes stress and affects the weave in your fabric, and that's where your problem begins... put your pattern against your piece now and you will see that all the unpicking has cause enough distortion. Oh NO!


So, What's a Budding Seamstress to Do?

Get a Universal Adjustable Zipper / Piping Foot and Experience the Difference for yourself...!

What this foot does is simply get your needle REALLY close to "the bump" (which is your zipper teeth or your piping cord) and still hold your fabric down as you stitch them, eliminating the risk of losing control or breaking needles.




Grab yours now and you can experience:

• Handle zippers like a pro - Done Quickly & Easily.
• Save Time and Get your project done - already!
  
• Do it Right in the first place - so you can Avoid Unpicking :-)
• A sense of achievement , because you've solved your own problem.
• No more frustration - just you and your sewing machine enjoying a stress-free time!
  
• Be proud and tell everyone: "I made this!"
  

Simply  Click The Add To Cart Button To Get Yours Now!